| Geneq SXBlue II Detailed Specifications |
| GPS Sensor |
| Receiver Type: |
L1, C/A code, with carrier phase smoothing |
| Channels: |
12-channel, parallel tracking (10-channel when tracking SBAS) |
| SBAS Support: |
2-channel, parallel tracking WAAS, EGNOS, MSAS and compatible |
| Update Rate: |
1Hz default, optional 2, 10 and 20Hz |
| DGPS Horizontal Accuracy: |
< 60cm 2dRMS, 95% confidence 1 (< 30cm HRMS, < 25cm CEP) |
| Horizontal Accuracy: |
< 2.5m 2dRMS, 95% confidence (autonomous, no SA) 2 |
| Optional Proprietary RTCM: |
< 20cm 2dRMS, 95% confidence 3 |
| Optional L1 RTK: |
< 5cm 2dRMS, 95% confidence 3 |
| Cold Start: |
60s (no almanac or RTC) |
| Reacquisition: |
< 1s |
| Maximum Speed: |
1607 km/h (999mph) |
| Maximum Altitude: |
18,288m (60,000 ft) |
| Communication |
| Ports: |
Bluetooth, RS-232C, USB 2.0 |
| Bluetooth Transmission: |
Class 1, 250m typical range 4 |
| Bluetooth Frequency: |
2.400 - 2.485 GHz |
| Fully Bluetooth pre-qualified: |
Bluetooth 2.0 |
| Baud Rates: |
4800 to 57600 |
| Data I/O Protocol: |
NMEA 183, Binary |
| Data Output Datum: |
WGS 84 (G1150) |
| Timing Output: |
1 PPS (HCMOS, active high, rising edge sync,10 kOhms, 10 pF load) |
| Event Marker Input: |
HCMOS, active low, falling edge sync, 10 kOhms, 10 pF load |
| Raw Measurement Data: |
Proprietary binary (Free RINEX utility) |
| Correction I/O Protocol: |
RTCM SC-104, Optional Proprietary format |
| GPS Status LED: |
Power, GPS lock, DGPS position, DIFF lock, Bluetooth connection |
| Battery Status LED: |
5 LED's bar graph |
| Power |
| Battery type: |
Field replaceable Lithium-Ion pack (Rechargeable in unit) |
| Battery Capacity: |
3,900mAh. 7.2V (Average autonomy: 10+ hours) |
| Power Consumption: |
< 2.5W |
| Charging Time: |
5 hours (with supplied charger) |
| Antenna Voltage Output: |
5 VDC |
| Antenna Input Impedance: |
50 Ohms |
| Environmental |
| Operating Temperature: |
-40°C to +85°C 5 |
| Storage Temperature: |
-40°C to +85°C |
| Humidity: |
95% non-condensing |
| Compliance: |
FCC, CE, RoHS and Lead-free |
| Mechanical |
| Enclosure Material: |
Re-enforced Nylon |
| Battery Case Material: |
ABS |
| Enclosure Rating: |
Waterproof, IP-67 |
| Immersion: |
30cm, 30 minutes |
| Enclosure Dimensions: |
14.1 x 8.0 x 4.7 cm (5.57 x 3.15 x 1.85 in.) |
| Weight: |
464g (1.02 lbs) |
| Data Connectors: |
DB-9 Female USB Type B Female |
| Antenna Connector: |
SMA Female |
| Antenna |
| GPS Frequency Range: |
L1 (1575 MHz +/- 10 MHz) |
| Gain (without cable): |
26.5 dB (+/- 2 dB), 35mA |
| Voltage: |
+5 VDC +/- 10% |
| Impedance: |
50 Ohms |
| Dimensions: |
5.5 diam. x 2.2 cm (2.16 x .87 in.) |
| Weight (without cable): |
79g (.17 lbs) (with removable magnet mount) |
| Antenna Connector: |
SMA Female |
| Finish: |
Fluid Resistant |
| Temperature: |
-55oC to +85oC |
| Humidity: |
Immersion 1 meter |
| Standard Accessories |
| SXBlue II GPS Receiver |
| Li-Ion Battery Pack (Field replaceable) |
| Li-Ion Charger |
| Belt/Shoulder Carrying Case |
| Precision Antenna with 1.5m cable |
| Soft Hat for antenna |
| RS-232 Cable (6 ft) |
| USB Type A/B Cable (6 ft) |
| CD-ROM (manuals and utilities) |
| Field Activated Options |
| 2Hz, 10Hz, or 20Hz Output Rate |
| Base Station RTCM Output |
| Proprietary Real-time for <20cm |
| L1 RTK for <5cm |
|
NOTES :
1. Depends on multipath environment, number of satellites in view, satellite geometry, baseline length (for local services) and ionospheric activities
2. Depends on multipath environment, number of satellites in view, satellite geometry and ionospheric activities
3. Option required on both base and rover. Also requires communication link between base and rover
4. Transmission in free space
5. Lithium-Ion battery performance degrades below 20ºC (-4ºF)
|